Search

Author

Subject

Date issued

Has File(s)

Search Results

Results 211-220 of 691 (Search time: 0.001 seconds).
  • Authors: Nguyen, Tuan Anh; Nguyen, Ngoc Huyen; Ngo, Xuan Dinh;  Advisor: -;  Co-Author: - (2022)

    In this study, we have investigated the influence of crystallinity, phase ratio, and heterojunction formation on the sensing performance of ZnO/ZnFe2O4 (ZnO/ZFO) nanocomposite-based electrochemical sensors for the detection of furazolidone (FZD) antibiotic drug. Results obtained show that the crystallinity and phase ratio of ZnO/ZFO nanocomposites have decisive effects on their electron transfer and active site density. Tuning the crystallinity and ZnO content of ZnO/ZFO nanocomposites is an effective way to enhance the FZD electrochemical sensing performance. Findings from this research suggested that the formation of ZnO/ZFO heterojunction could significantly improve their electrochemical responses for FZD due to arising of the internal electric field and redistribution of Zn2+, F...

  • Authors: Huan Thanh, Duong; Hieu Chi, Phan; Tien Thinh, Le;  Advisor: -;  Co-Author: - (2022)

    Functionally Graded Materials (FGM) is the advanced material that covers the advantages of both metal and ceramic which contain FGM. Due to the perfect combination, FGM plate is widely developed with the requirement for the practical application to avoid the difficulties from conventional approaches. Consequently, the study establishes the database from analytical model and uses it for developing a machine learning model in the desire of finding an alternative model to predict critical buckling load of the plate. Such a machine learning model is crucial for predicting critical buckling load of the FGM plate without complexity of analytical developments or finite element resources. The Gaussian Process Regression model has been developed based on the database containing 1000 labeled ...

  • Authors: Cao, H. Nam;  Advisor: -;  Co-Author: - (2022)

    By applying the island rule proposed recently, we compute the entanglement entropy of Hawking radiation and study the Page curve for the eternal black holes in massive gravity. We investigate for both the neutral and charged black holes which the corresponding results of Schwarzschild and Reissner–Nordström black holes are restored in the limit of massless graviton. We show for the neutral and non-extremal charged black holes that the island is not formed at the early times of the evaporation and hence the entanglement entropy increases linearly in time. However, for the extremal charged black hole, the calculation of the entanglement entropy at the early times without the island is ill-defined because the metric is divergent at the curvature singularity. This implies that new physi...

  • Authors: David, Wai Lun Ng; Abel, Duarte Alonso; Alessandro, Bressan;  Advisor: -;  Co-Author: - (2022)

    The purpose of this study is to build an understanding of how firms operate under the COVID-19 crisis. Specifically, the study examines the significance of firms’ survival for their surrounding community, business–community relations during this severe situation and factors helping firms address this unprecedented challenge. The conceptual tenets of stakeholder theory are considered.

  • Authors: Duong Thi Ha*, Dinh Ngoc Dzung, Nguyen Van Ngoc, Bui Son Tung, Thanh Son Pham, YoungPak Lee, Liang Yao Chen, Bui Xuan Khuyen and Vu Dinh Lam;  Advisor: -;  Co-Author: - (2021)

    We demonstrate a multifunctional metamaterial (MM) structure which can behave like a perfect absorber (PA) or polarization converter (PC) by controlling the lumped varactor. In PC mode, the MM revealed cross-polarization conversion in a frequency range from 2.0 to 7.0 GHz with a polarization-conversion ratio of nearly 100%. While in the PA state, triple-band high absorption was achieved. In addition, we investigated numerically the PA and PC modes by scaling down the geometrical dimension and orientation of the proposed unit cells, for further development of innovative methods in the THz range. Our work is expected to contribute to the realization of future multifunctional MM-based devices working in the GHz or higher-frequency range.

  • Authors: Kien.Nguyen Trung;  Advisor: -;  Co-Author: - (2021)

    Improving engine power density by using supercharging system with exhaust gas energy recovery (called an exhaust gas turbocharger) is a trend of improving non-turbocharged base engines in Vietnam. These engines are still capable of being used for a considerable time, but the power generating is not big enough to meet the requirements of improving vehicle maneuverability, especially special vehicles such us Russian or Vietnamese tanks. To determine the maximum level of pressure ratio of the engine according to the engine thermal load criteria, we can use direct and indirect indicators. The content of the paper is to determine the heat flow density for cooling water in the V12 engine according to the different pressure ratios. From that, the maximum level of pressure ratio for the eng...

  • Authors: Nguyen, Khong Van; Vu, Le Anh; Thoan Tran, Van; Trung, Tran Anh; Vu, Nguyen Hoang;  Advisor: -;  Co-Author: - (2022)

    Research, development and application of alternative fuels are common approaches in many countries around the world to reduce dependence on fossil fuels, to improve energy security as well as to decrease environmental pollution such as the greenhouse gas emission. The use of biodiesel fuels as an alternative fuel for petroleum diesel fuel is very effective for the reduction of CO2 emission, because biodiesel is produced from renewable biomass resources. However, there are a few of the using biodiesel research on CRDI (Common Rail Direct Injection) diesel engine. This paper describes a real time CRDI diesel engine 2.5TCI-A HYUNDAI STAREX simulations with blends of palm oil derived biodiesel and diesel using Matlab simulink software. The results show small deviation from cylinder pres...

  • Authors: Minh, Huy Le; Hong Ha, Thi Vu; Dabin, Wang; Jinyi, Lee;  Advisor: -;  Co-Author: - (2022)

    This article presents a cylinder-type magnetic camera (CMC) system in nondestructive testing (NDT) of a heat exchanger (HX) tube. The CMC system is developed for the inspection of corrosion on HX tubes of nuclear power plants. The CMC probe works based on the principle of eddy current testing, in which a single-large bobbin coil is used to supply eddy current on the tube, and a matrix array of InSb Hall sensor is used to measure the electromagnetic field around the corrosion. The CMC system can measure both the real and imaginary components of the magnetic field. The CMC system can operate in two modes: single-line scan mode by selecting a single-line Hall sensor or area scan mode by the electrical scan. The limitations and advantages of each operation mode will be presented. The CM...

  • Authors: Elsisi, M.; Minh, Quang Tran; Vu, Thi Lien; Nguyen, Thi Thanh Nga;  Advisor: -;  Co-Author: - (2022)

    Managing procedure for charging and discharging battery system plays an essential contributor in improving the performance of energy storage system for example increment of utilizing batteries. This paper aims to develop a new hybrid genetic algorithm-based proportional integral (GA-based PI) controller with an adaptive neuro-fuzzy inference system (ANFIS) for the charging balance of batteries. The dataset is generated by using the GA-based PI controller, then a training strategy is introduced for the ANFIS controller. The proposed approach is evaluated by the GA-based PI controller and the PI controller based on Ziegler Nichols method

  • Authors: Vu, Dinh Quang; Tran, Quoc Quan; Phuong,Tran;  Advisor: -;  Co-Author: - (2022)

    The nonlinear static buckling analysis of magneto-electro-elastic sandwich plate on Pasternak-type elastic foundations subjected to the mechanical, thermal, electric and magnetic loadings is presented in this paper. The sandwich plate is composed of an auxetic honeycomb core with negative Poisson’s ratio and two face sheets made of magneto-electro-elastic​ material. The system basic equations are derived based on the Reddy’s higher order shear deformation plate theory taking into account the effect of von Kármán the kinematic nonlinearity and initial imperfection. The form of possible solutions and electric, magnetic potentials are chosen as trigonometric functions based on two cases of boundary conditions. The relationship between axial compressive loading and dimensionless deflect...