Search
Author
- Osman, Ahmed I. (5)
- Daqing, Ma (3)
- Jorgensen, Ed (3)
- Li, Yan (3)
- next >
Subject
- kinh tế (26)
- Economics (12)
- programming (10)
- XRD (10)
- next >
Date issued
- 2020 - 2025 (2128)
- 2010 - 2019 (129)
- 2000 - 2009 (9)
- 1999 - 1999 (1)
Has File(s)
Search Results
Surface soil moisture is a key hydrologic state variable that greatly influences the global environment and human society. Its significant decrease in the Mediterranean region, registered since the 1950s, and expected to continue in the next century, threatens soil health and crops. Microwave remote sensing techniques are becoming a key tool for the implementation of climate-smart agriculture, as a means for surface soil moisture retrieval that exploits the correlation between liquid water and the dielectric properties of soil. In this study, a workflow in Google Earth Engine was developed to estimate surface soil moisture in the agricultural fields of the Marche region (Italy) through Synthetic Aperture Radar data. Firstly, agricultural areas were extracted with both Sentinel-2 opt... |
Early warning systems are an essential tool for managing flood emergencies. Alert and warning applications and mobile-phone messaging services have become increasingly widespread among major international emergency agencies as means of communicating risks to the population, and their effectiveness in reducing human and material damages during flood events is significant. Despite their crucial importance, one of the main challenges in the field of emergency communication is the lack of protocols for systematic and standardized production of warning messages. |
This study was conducted to clarify the relationship between fish species composition and environmental factors at various scales in river estuaries in the Japanese archipelago. The estuaries harbor diverse fish species composition due to their complex topography, varied climatic zones, and ocean currents. Non-hierarchical cluster analysis classified the fish species composition of 100 river estuaries (58 families, 152 species, and 486,356 individuals) into five groups. The highest number of species was confirmed in the group of river estuaries located in southwestern Japan and flowing into the inner bay (55.1 ± 9.6 species), characterized by an abundance of the number of Gobiidae species. In contrast, the species number was the lowest in the groups consisting of river estuaries tha... |
The default values in the models used for environmental risk assessment are mostly more than a decade old. Market developments, structural and legal changes lead to adaptions of animal husbandry and manure management during this time. The scope of this research project was the critical review with regard to the topicality and plausibility of the default values for the assessment of insecticides/larvicides and disinfectants in stables, which are mentioned in the relevant emission scenario documents (Joint Research Centre, Institute for Health and Consumer Protection, Raffael B, Van de Plassche E (2012) Emission scenario document for product type 3: veterinary hygiene biocidal products. Publications Office. 10.2788/29747; OECD (2006) Emission Scenario Document for Product Type 18 No.1... |
A global framework to assess the energy use and efficiency in wastewater systems is presented, focusing on the development of a portfolio of energy use improvement measures specifically tailored to these systems. The framework includes a performance assessment system for energy efficiency in wastewater systems and an energy balance scheme. The development and analysis of the portfolio of measures included the following steps: (i) an extensive review and compilation of existing energy improvement measures on the urban water cycle, (ii) a tailored survey addressed to multidisciplinary teams of wastewater utilities, (iii) the consolidation of the portfolio of measures for wastewater systems with the identification of main benefits and drawbacks of each measure and (iv) the discussion o... |
The elongational rheology of blends of a polystyrene (PS) Pom-Pom with two linear polystyrenes was recently reported by Hirschberg et al. (J. Rheol. 2023, 67:403–415). The Pom-Pom PS280k-2x22-22k with a self-entangled backbone (Mw,bb = 280 kg/mol) and 22 entangled sidearms (Mw,a = 22 kg/mol) at each of the two branch points was blended at weight fractions from 75 to 2 wt% with two linear polystyrenes (PS) having Mw of 43 kg/mol (PS43k) and 90 kg/mol (PS90k), respectively. While the pure Pom-Pom shows strong strain hardening in elongational flow (SHF > 100), strain hardening (SHF > 10) is still observed in Pom-Pom/linear blends containing only 2 wt% of Pom-Pom. |
For a significant increase in the strength of high-strength fine-grained structural steels with a nominal yield strength ≥690 MPa, the addition of microalloying elements such as Nb and Ti is required. The standard specifications for the chemical composition of these steels (e.g., in EN 10025-6) often only give the manufacturer limit contents to achieve the defined properties. The effect of the alloying elements in the heat affected zone (HAZ) is sometimes completely contrary. This makes it difficult to adequately predict the batch dependency regarding weldability and the load-bearing behaviour of the welded joint. Three different micro-alloyed steels of the grade S690QL were produced on a laboratory scale, focusing on different Nb and Ti contents. |
Creep-resistant steels such as the 13CrMoV9-10, used in the construction of thick-walled pressure vessels, are most commonly submerged arc welded (SAW). These steels can develop stress relief cracks (SRC) if the mandatory post weld heat treatment (PWHT) is performed improperly. Current PWHT parameters, such as heating rate and holding time at a specific holding temperature, are based on both empirical experience and conventional free shrinking welding experiments to characterize the SRC-susceptibility of the weld. These cannot adequately depict the higher residual stresses caused by the structurally induced stiffness of the surrounding construction. |
The conventional approach when engineering components manufactured from titanium is to design the thermomechanical processing to develop an optimal microstructure in a single alloy. However, this conventional approach can lead to unnecessary over-engineering of components, particularly when only a specific subcomponent region is under demanding service stresses and environments. One approach being developed to join multiple alloys in a single component and enhance engineering performance and efficiency is FAST-DB—whereby multiple alloys in powder form are diffusion bonded (DB) using field-assisted sintering technology (FAST). But the joining of multiple alloys using conventional welding and joining techniques can generate high residual stress in the bond region that can affect the m... |
Fusion-bonded and low-diluted overlay welded coatings are frequently very thick (>1mm). High-speed laser cladding is a novel process capable of producing thin fusion-bonded and low-diluted coatings with high coverage rates and low heat input. In this study, for the first time, high-speed laser cladding was used to fabricate relatively thin Ni-based coatings reinforced with chromium carbides onto low-alloy structural and quenched and tempered steels. Obtained coatings were characterized with X-ray diffraction (XRD), optical (OM), and scanning electron microscopy (SEM), as well as electron backscatter diffraction (EBSD). Mechanical and wear properties were tested with Vickers microhardness measurements and three-body dry-sand rubber wheel abrasion tests (RWAT). |
