Search
Author
- Amir, Ebrahimi (2)
- Aydin, Azizi (2)
- George, Haller (2)
- James, M. Fiore (2)
- next >
Subject
- robotics (9)
- Engineering (8)
- engineering (8)
- công nghệ (3)
- next >
Date issued
- 2020 - 2023 (215)
- 2010 - 2019 (28)
- 2001 - 2009 (6)
Has File(s)
- true (249)
Search Results
Ferroelectric materials receive great attention from the scientific international community because of the interesting phenomena they exhibit and their multiple applications such as transducers, capacitors, pyroelectric sensors, sonars, random access memories, etc. The demand for ferroelectric materials for technological applications enforced the in-depth research, in addition to the improvement of processing and characterization techniques. This book contains nine chapters and offers the results of several researches covering fabrication, properties, theoretical topics, and phenomena at the nanoscale. |
Rapid deployment of wind and solar energy generation is going to result in a series of new problems with regards to the reliability of our electrical grid in terms of outages, cost, and life-time, forcing us to promptly deal with the challenging restructuring of our energy systems. Increased penetration of fluctuating renewable energy resources is a challenge for the electrical grid. Proposing solutions to deal with this problem also impacts the functionality of large generators. The power electronic generator interactions, multi-domain modelling, and reliable monitoring systems are examples of new challenges in this field. This book presents some new modelling methods and technologies for renewable energy generators including wind, ocean, and hydropower systems. |
Hydrophilic polymer coatings on artificial implants generate excellent tribological properties. The friction properties of polymer coatings are affected by salt ion factors. Herein, the atomic force microscopy (AFM) was used to show that the superlubricity was achieved between poly(vinylphosphonic acid) (PVPA)-modified Ti6Al4V and polystyrene (PS) microsphere probe lubricated with monovalent salt solutions (LiCl, NaCl, KCl, and CsCl). Considering that adhesion is an important cause of friction changes, the AFM was further utilized to obtain adhesion between friction pairs in different salt solutions. The results indicated that the larger the cation radius in the lubricant, the smaller the adhesion, and the lower the friction coefficient of the PVPA coating. |
The astonishingly distinct lubricity difference between the ionic liquid modified carbon nanoparticles grafted by anion and cation moieties (A-g-CNPs and C-g-CNPs) was well established as additives of polyethylene glycol (PEG200). The peripheral anion moieties and positively charged inner parts of C-g-CNPs could successively absorb onto the friction interfaces by electrostatic interactions to form the organic—inorganic electric double layer structures, tremendously boosting the lubricity of PEG200. Contrarily, the preferentially electrostatic adsorption of negatively charged inner parts but repulsion of the peripheral cation moieties determined the weak embedded stability of A-g-CNPs between the friction interfaces, even impairing the lubricity of PEG200. |
Overview: A technician is only as accurate as the measurement equipment they are using. If the equipment is used incorrectly or is faulty, then the measurements will be inaccurate. If the measurements are inaccurate, then the technician will draw the wrong conclusions. To avoid getting inaccurate readings, you need to handle, use, and store meters properly. When you are done using a multimeter, it should always be turned off to extend battery life. |
This book contains information obtained from authentic and highly regarded sources. Reprinted material is quoted with
permission, and sources are indicated. A wide variety of references are listed. Reasonable efforts have been made to publish
reliable data and information, but the author and the publisher cannot assume responsibility for the validity of all materials
or for the consequences of their use. |
This book is an introduction to the language of systems biology, which is spoken among many disciplines, from biology to engineering. Authors Thomas Sauter and Marco Albrecht draw on a multidisciplinary background and evidence-based learning to facilitate the understanding of biochemical networks, metabolic modeling and system dynamics |
Overview: This text covers the theory and application of discrete semiconductor devices including diodes, bipolar junction transistors, JFETs, MOSEFETs and IGBTs. It is appropriate for Associate and Bachelors degrees programs in Electrical and Electronic Engineering Technology, Electrical Engineering and similar areas of study. Applications include rectifying, clipping, clamping, switching, small signal amplifiers and followers, and class A, B and D power amplifiers. A companion laboratory manual is available. The text is also available in Open Document Text (.odt) format. |
This text is based on the earlier Workbook for DC Electrical Circuits, which it replaces. The original expository text has been greatly expanded and includes many examples along with computer simulations. For the convenience of those who used the Workbook, many of the problem sets are the same, with some re-ordering depending on the chapter. |
Analyzes core linear analog circuit designs: common-source, common-gate, and common-drain stages
Design-oriented approach; analyzes various circuits through examples and exercises
Part of the Modular Series of Microelectronic Device and Circuit Design
Each module in the series provides a brief fundamental look at a specific topic
"As of November 1, 2022, National Technology and Science Press ("NTS") has discontinued publication of 'Analysis and Design of Elementary MOS Amplifier Stages.' Accordingly, NTS has returned all copyrights and attendant rights with respect to the work to Boris Murmann." |
