Browsing by Author Nguyen Thanh Vinh

Jump to: 0-9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
or enter first few letters:  
Showing results [1 - 2] / 2
  • Authors: Nguyen Thanh Vinh; Nguyen Thanh Hai; Tran Van Dang; Bui Thi Hang; Anh-Tuan Le; Tuyet Nhung Pham; Ngo Xuan Dinh; Vu Dinh Lam; Mam Hoai Nam; Tran Dang Thanh; Nguyen Trung Huy; Nguyen Van Quy;  Advisor: -;  Co-Author: - (2021)

    Zinc Ferrite (ZnFe2O4, ZFO) nanoparticles (NPs) as a multi-sensing material are successfully synthesised via a hydrothermal method and a following annealing treatment. The as-prepared ZFO-NPs were applied in electrochemical and mass-type sensors by depositing NPs directly on the screen-printed electrode (SPE) and the active electrode of a quartz crystal microbalance (QCM), respectively. The obtained results show the ZFO-NPs possessed excellent detection performance to sulphur dioxide (SO2) in the range of 2.5–20 ppm at room temperature. QCM sensor coated with ZFO-NPs showed a high response, good repeatability, as well as short-response time. Moreover, the modified-SPE with ZFO-NPs sen...
  • Authors: Nguyen Thanh Vinh; Tran Van Dang; Bui Thi Hang; Anh-Tuan Le; Nguyen Tri Tuan; Le Khanh Vinh; Nguyen Van Quy;  Advisor: -;  Co-Author: - (2021)

    The sensing material plays a very important role in determining the sensing properties of a gas sensor. In order to synthesise the sensing material, the precursors have a large effect on the properties of the sensing material. In this study, three types of γ-Fe2O3 nanoparticles were prepared with different ferric ion concentrations of [Fe3+] and [Fe2+] as precursors, by a typical facile chemical precipitation process and a following annealing treatment. A mass-type gas sensor was fabricated by using a quartz crystal microbalance (QCM) coated with various γ-Fe2O3 nanoparticles. The morphology, crystallisation, and gas adsorption characteristics of the γ-Fe2O3 nanoparticles were investi...