Search

Current filters:


Current filters:


Search Results

Results 121-130 of 144 (Search time: 0.002 seconds).
  • Authors: Nguyen Thanh Vinh; Tran Van Dang; Bui Thi Hang; Anh-Tuan Le; Nguyen Tri Tuan; Le Khanh Vinh; Nguyen Van Quy;  Advisor: -;  Co-Author: - (2021)

    The sensing material plays a very important role in determining the sensing properties of a gas sensor. In order to synthesise the sensing material, the precursors have a large effect on the properties of the sensing material. In this study, three types of γ-Fe2O3 nanoparticles were prepared with different ferric ion concentrations of [Fe3+] and [Fe2+] as precursors, by a typical facile chemical precipitation process and a following annealing treatment. A mass-type gas sensor was fabricated by using a quartz crystal microbalance (QCM) coated with various γ-Fe2O3 nanoparticles. The morphology, crystallisation, and gas adsorption characteristics of the γ-Fe2O3 nanoparticles were investigated. The effect of ferric ion concentrations of [Fe3+] and [Fe2+] on sensing properties is discuss...

  • Authors: Minhhuy Le;  Advisor: Van Su Luong; Khoa Dang Nguyen; Jinyi Lee;  Co-Author: - (2021)

    Detection of corrosion at rivet sites in a multilayer structure of an aircraft is an essential task to ensure the flight safety of an aircraft. It is challenging to detect the corrosion due to the influence on the signal of the rivet and the multiple fastened layers in the structure. In this letter, an electromagnetic testing method is used in conjunction with principal component analysis (PCA) to detect corrosion around fasteners. Multiple Hall sensors were used for efficient measurement of the magnetic field distribution at the rivet sites. The features of the scanned magnetic image were automatically extracted by the PCA in orthogonal subspaces. The proposed method shows potential results of features extraction and corrosion signal extraction for further development of electromag...

  • Authors: Quoc, Thai Cao; Quan, Hoang Vuong; Hiep, Hung Pham; ; Dinh, Hai Luong; Manh, Toan Ho; Anh, Duc Hoang; Minh, Trang Do;  Advisor: -;  Co-Author: - (2021)

    The mental health of university students is not only a predominant topic for psychology and education researchers but also a source of interest for policymakers and various stakeholders. Although there has been a lot of research on higher education students’ mental health, we have little understanding on the mental health of international students (MHIS). Despite their distinctive characteristics compared to native students, the mental health issues of international students only started receiving attention very recently. So far, the literature on this topic lacks a comprehensive overview of its sub-topic and trending issues. By using bibliometric analysis, this research aims to fulfil this gap and provide a review of the extant literature about MHIS. Specifically, this study aims t...

  • Authors: Abdullah H. Alshehr; Jhi Yong Loke; Viet Huong Nguyen; Alexander Jones; Hatameh Asgarimoghaddam; Louis-Vincent Delumeau; Ahmed Shahin; Khaled H. Ibrahim; Kissan Mistry; Mustafa Yavuz; David Mu�oz-Rojas; Kevin P. Musselman;  Advisor: -;  Co-Author: - (2021)

    Nanoscale films are integral to all modern electronics. To optimize device performance, researchers vary the film thickness by making batches of devices, which is time-consuming and produces experimental artifacts. Thin films with nanoscale thickness gradients that are rapidly deposited in open air for combinatorial and high-throughput (CHT) studies are presented. Atmospheric pressure spatial atomic layer deposition reactor heads are used to produce spatially varying chemical vapor deposition rates on the order of angstroms per second. ZnO and Al2O3 films are printed with nm-scale thickness gradients in as little as 45 s and CHT analysis of a metal-insulator-metal diode and perovskite solar cell is performed. By testing 360 Pt/Al2O3/Al diodes with 18 different Al2O3 thicknesses on o...

  • Authors: Quan-Hoang Vuong; Minh-Hoang Nguyen; Tam-Tri Le;  Advisor: -;  Co-Author: - (2021)

    Although studies have explored the predictors of book reading interest among children, little is known about the underlying mechanism that helps children become interested in reading books. This study attempt to demonstrate: (1) how book-reading interest is driven by reasons for choosing books (recommendation or personal preference), (2) how students with high and low academic achievements are motivated by different thinking pathways, and (3) how home scholarly culture improves book-reading interest through such pathways. Using Bayesian analysis on a dataset of survey responses from 4966 Vietnamese secondary students (11–15 years old, sixth to ninth grade), we found: (i) Reading interest is positively associated with a book recommendation and parental book reading activities (parent...

  • Authors: Punam Murkute; Carmen Jiménez; Abderrahime Sekkat; Chiara Crivello; Viet Huong Nguyen; David Muñoz Rojas;  Advisor: -;  Co-Author: - (2021)

    Al-doped ZnO (AZO) has received significant attention due to its inherent properties like wide bandgap, high optical transparency, and electrical conductivity that has established its potential application in optoelectronic devices. The primary challenge in the efficient use of AZO thin films is the un-intentional formation of intrinsic defects, which deteriorate the device performance. The research community has made a significant effort to minimize these intrinsic defects and obtained high-quality films using low-cost growth techniques followed by a post-growth annealing treatment that has successfully suppressed defect states' formation. This presentation provides a comprehensive picture of the current state of knowledge on AZO's growth using spatial atomic layer deposition (SALD...

  • Authors: Truong V. Vu; Binh D. Pham; Phuc H. Pham; Hung V. Vu; Bo X. Tran;  Advisor: -;  Co-Author: - (2021)

    We present a numerical investigation of the breakup and freezing of a pendant hollow water drop beneath a cold curved surface. The drop contains a bubble surrounded by a shell of water that forms at an outer wetting angle of θo with the surface. The freezing begins on the cold curved surface and evolves in the direction of gravity. As it freezes, the water accumulates and forms a bulbous end at the bottom of the drop. Breakup can occur, inducing a daughter water drop. As a result, the freezing process of the remaining hollow drop attached to the surface takes less time, and the frozen drop shrinks. However, this breakup has no effect on the bubble. The various parameters under consideration include the Bond number Bo, the Stefan number St, the size of the bubble, and the angle θo. I...

  • Authors: Quan Hoang, Vuong; Minh Hoang, Nguyen; Tam Tri, Le;  Advisor: -;  Co-Author: - (2021)

    The book examines the psycho-religious mechanism behind the violent extremism of suicide attacks in the post-9/11 world. It employs the mindsponge concept, an original dataset, and original research results obtained from the authors' statistical investigations using the Hamiltonian Markov chain Monte Carlo technique. It provides insights and implications for policymakers and strategists in their efforts to engage in peace talks and reduce violent conflicts worldwide.

  • Authors: Nguyen, Cuong T.;  Advisor: Vu, Hung V.; Vu, Truong V.; Truong, Thuan V.; Ho, Nang X.; Pham, Binh D.; Nguyen, Vinh T.; Nguyen, Hoe D.;  Co-Author: - (2021)

    Compound droplets with different sizes are increasingly used in industrial production and academic research. This study aims to improve understanding of the dynamical behaviors of the compound droplet moving in microchannels. The compound droplet consisting of one inner core is initially concentric and placed at the entrance of a circular channel with a cone at the downstream region. Following this primary channel is a secondary channel that is circular and straight. Manipulation of the droplet is assisted by a flow introduced via the gap between two channels. The numerical results show that when passing through these confined channels, the droplet experiences a finite deformation or breakup mode. In each mode, the deformation or breakup of the compound droplet is also different whe...

  • Authors: Thomas E. Jones; Minh, Hoang Nguyen;  Advisor: -;  Co-Author: - (2021)

    The rapid post-millennial internationalisation of Japan’s tourism sector and the influx of international visi-tors have quickly increased visitor motivations’ heterogeneity, thereby posing challenges for management. Given the lack of prior research, we aimed to identify nature-based tourism (NBT) push-factor motivation domains of visitors in a Japanese national park and segment domestic and international visitors based on their motivations, demographics and trip profiles. Primary data collection of 137 responses took place in November 2019 through an on-site self-admin-istered questionnaire. From 11 push-factor statements, the principal component analysis yielded a four-factor solution: ‘enjoying nature with family or friends’, ‘improving physical health’, ‘discovering and learning’...