Thông tin tài liệu


Nhan đề : 
Modeling of Five-Axis Ball-End Milling with Tool Orientation Effects
Tác giả : 
Minh-Quang Tran
Vu Thi Lien
Meng-Kun Liu
Thi Thanh Nga, Nguyen
Năm xuất bản : 
2022
Nhà xuất bản : 
Springer
Tóm tắt : 
An accurate and fast estimation of cutting forces is necessary for improving the performance of five-axis milling. However, the engagement between cutter and workpiece is very complex and irregular, it represents the main challenge for the prediction of cutting forces. This research aims to present a cutting force model of five-axis ball end milling, in which the effects of lead and tilt angles are investigated. The simulation results show that the resultant cutting force and total engagement area between cutter and workpiece are increased rapidly when the tilt and lead angles are close to zero. The cutting forces under different tool orientations are analyzed. The results of the proposed approach are successfully evaluated by the existing model.
URI: 
https://link.springer.com/chapter/10.1007/978-3-030-92574-1_62
https://dlib.phenikaa-uni.edu.vn/handle/PNK/5953
Bộ sưu tập
Bài báo khoa học
XEM MÔ TẢ

23

XEM TOÀN VĂN

0

Danh sách tệp tin đính kèm:

Hiện tại không có tệp tin đính kèm tới tài liệu.