Thông tin tài liệu
| Nhan đề : |
| Additive manufacturing of recycled plastics: a ‘techno-eco-efficiency’ assessment |
| Tác giả : |
| Heshan, Jayawardane Ian J., Davies J. R., Gamage |
| Năm xuất bản : |
| 2023 |
| Nhà xuất bản : |
| Springer |
| Tóm tắt : |
| Plastic materials have been widely used to replace metals in functional parts due to their lower cost and comparable technical properties. However, the increasing use of virgin plastic material in consumer and industrial applications has placed a significant burden on waste management due to the volume of waste created and the potential negative effects of its end-of-life processing. There is a need to adopt circular economy strategies such as plastic recycling within industrial applications in order to reduce this significant waste management pressure. The present study used recycled polylactic acid (PLA) material as a feedstock for the 3D printing of a centrifugal semi-open pump impeller. The technical performance of 3D printed recycled PLA material and virgin PLA material was compared in this study. |
| Mô tả: |
| CC BY |
| URI: |
| https://link.springer.com/article/10.1007/s00170-023-11169-8 https://dlib.phenikaa-uni.edu.vn/handle/PNK/8015 |
| Bộ sưu tập |
| OER - Kỹ thuật điện; Điện tử - Viễn thông |
XEM MÔ TẢ
91
XEM TOÀN VĂN
82
Danh sách tệp tin đính kèm: